cPanel is Inaccessible, What Should I do

If you find that your website hosted with us is inaccessible you are unable to access cPanel and webmail and in some cases, the links to cPanel and webmail are displaying an error message, like a Server connection timed out, there are some basic checks and actions you will need to take to get this resolved.

First of all, you should check whether your server is up. Please visit the updates section on our website to see if there are any known technical issues. If the server is running normally, it will most likely that your external IP address was blocked by Firewall. Your external IP is also referred to as your internet connection IP and you can check it at Whatismyip

The common errors you encounter when you are blocked by server Firewall will include:

* The connection was reset. The connection to the server was reset while the page was loading.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Further reading:

Email Problems: What Should I do?

How Did My Email Get Compromised and What Can I Do to Stop It?

How to Reset or Change to a New CPanel Password


Firewall is a set of devices designed to protect networks from unauthorized access while permitting legitimate communications to pass. Due to security reasons, we have installed Firewall on our servers, too.

Automatic firewall blocks are created for a certain external IP address from which unauthorized access attempts were noticed by the Firewall monitoring program. In case of 20 failed login attempts from your IP address, it gets temporarily blocked for 10 minutes. If more failed login attempts are detected during this period, the IP gets blocked permanently. If the server detects 15 failed login attempts from different IP addresses, this account will be temporarily locked for 5 minutes.

So, if you find yourself not being able to connect to the website, cPanel and webmail from a certain computer, most likely, you have triggered the Firewall rules. Please contact our Support and we will gladly unlock your IP. You can check your external IP address with whatismyip.

What can be the reason of the IP being blocked and how to avoid it?

    Exceeding the number of failed cPanel login attempts
    Failed POP3/IMAP/SMTP or Webmail login
    Incorrect email client settings
    Failed FTP/SSH login
    Failed web page login
    PortScan activity


Exceeding the number of failed cPanel login attempts

When you were not able to log into cPanel for the first time, please do not try to do it as many times as possible. Once you have used the incorrect login details 20 times in 300 seconds, the IP gets blocked. To avoid that, use auto-login options in Todhost account or check your login details in the Welcome Email Guide that was sent to the email account associated with the hosting package. Otherwise, feel free to ask for the cPanel password reset via our Support.

NOTE: You can use Roboform and Lastpass web browser addons to keep your login details safe and secure without having to type and remember them.


Failed POP3/IMAP/SMTP or Webmail login

Apart from cPanel login protection, Firewall also prevents unauthorized access to mail service.

  1. Block due to webmail failed login attempts

If you were having issues with logging into webmail and, as a result, both cPanel and webmail are no longer available, most likely you have triggered a similar IP block for email access.

  2. Block due to failed POP3/IMAP login attempts

If you start receiving errors/pop-up windows related to IMAP/POP3 failed authentication in your email client, then it is possible that login credentials for the email account are outdated/incorrect. Unfortunately, in this case, the email client will not stop trying to access the mail server which may in time result in a permanent IP block as well.

  3. Block due to failed SMTP login attempts
This kind of block occurs when SMTP authentication data is not valid so you can’t send mail from the email client (you can still have correct settings for the incoming mail server and receive new emails without issues). Usual symptoms for such issue are the emails that do not leave the “Outbox” folder or errors/pop-up messages that notify about failed SMTP authentication. Make sure that SMTP login is your full email address, and the password is the same as for the incoming mail server.

If you still can’t log in with the old password, consider resetting it once your IP address is unlocked. You can do it in your cPanel account on the Email accounts page >> Manage option:


Further reading:

How to Fix Email Deliverability Problems

CPanel Security


    Incorrect email client settings

The email client settings may also cause an IP block, so if you are struggling with an email client setup, it is better to delete the non-functioning email account from the email client and start from scratch later. You can find the correct settings in the welcome email sent to you when your web hosting account was created or request support to resend the information.

We can also to assist you with its setup in LiveChat.

NOTE: Frequent POP3 queries to the server can cause high general server load. In order to avoid this, we have implemented the limit of 100 POP3 connections per hour from a single IP address for all shared users. Therefore, it is not recommended to set POP3 mail check interval to less than 5 minutes in order to avoid IP blocking.

    Failed FTP/SSH login

Make sure your FTP client is using correct login details and appropriate settings. Please make sure you use port 21 for FTP and 21098 for SFTP (SSH). Note that we enable SSH per a user's request. Therefore, please contact us via Support with the request to enable SSH. The tips on how to connect via SSH can be found here.

    Failed web page login

It occurs when there is an authentication form or a protected directory on the website. Please make sure you use correct login data.

    PortScan activity

Port scan is an attack that sends requests of a client to a range of server port addresses on a host with the goal of finding an active port and exploiting a known vulnerability of that service. To avoid that, please make sure your clients are configured in a way not to permanently attempt to scan ports of a server. Reduce timeout intervals on all FTP and mail clients in your network. If there are many users in your network, and all of them are accessing the Internet from an external IP address, make sure they do not reconnect using FTP or mail clients frequently. Connection requests coming from one IP can trigger the firewall to block the IP. You can modify FileZilla's max concurrent connections for every site you connect to in the following way:

    1. Start up the FTP program FileZilla and go to Edit -> Settings
    2. Under the left sidebar menu on the Settings window, you should see the Transfers option. Click on it.
    3. Under Concurrent transfers, you have the label "Maximum simultaneous transfers:", then a text box with a numeric value in it. Make sure that the number is 3 or less. It is recommended to keep this value at 1 if possible, because having multiple connections will slow down your uploads in the long run. If the value is more than 3, you may get blocked.
    4. Hit the button labeled "OK" and exit FileZilla. Then, start it up again for the changes to take effect:

To change the maximum number of concurrent FTP connections on a per-site basis, you need to go to File -> Site Manager. Click on the saved website you wish to edit and click on the "Transfer Settings" tab. Change the value in the text box listed there to 3 or less, hit the button labeled "OK", disconnect and restart FileZilla for the changes to take effect.

  • 0 Users Found This Useful
Was this answer helpful?

Related Articles

I have a full backup of account through cPanel. How do I restore it?

It is recommended that you maintain healthy backup of your website and possibly download the...

How To Create, Edit, and Delete a File in cPanel Using File Manager

This tutorial will be useful for you to understand how to create a file, edit a file or delete...

How to Create and Manage a MySQL Database

Create MySQL Database and User via cPanel The MySQL Database Wizard is another useful tool...

How do I create and remove an Addon Domain?

An add-on domain is a separate domain name that you add to your web hosting subscription with...

How to Set Up and Delete a Cron Job

A cron job allows you to run a certain command at times set by the job. For example, you could...